1. Remove existing showerhead by using an adjustable wrench to unthread the top half of the showerhead from the shower arm pipe. (See Fig. A)
2. If your shower arm has an integral ball joint (See Fig. B), it may either be replaced with a standard 1/2” shower arm available at any hardware store or an adaptor may be used. Purchase correct adaptor from a hardware or plumbing supply store.
3. Wrap approximately 6” of thread sealing tape around the 1/2” threads of the shower arm.
4. Attach included showerhead by threading unit onto shower arm. Do not overtighten.
5. Allow water to be run through showerhead for 1 or 2 minutes before the first use.
6. The water saving showerhead supplied with the unit may be detached at any time and replaced with another showerhead. It is recommended that you do not use showerheads with integrated or built-in water shut-off levers or controls.

Your personal de-chlorinating cartridge should be changed every three months or sooner if chlorine odor returns or cartridge begins to clog up. This will depend on the quality of the water and the amount of use.